Cylindrical horizontal three-stage gearboxes type Ts3H, 1Ts3H
from 750000 ₽
Cylindrical horizontal gearboxes with Novikov gears of 1Ts3N, Ts3N, Ts2N series are general purpose drives designed to increase torque and reduce speed of various machines and mechanisms.
| Axis arrangement |
Parallel |
|---|---|
| Number of steps |
Two-stage |
Further information on gearbox dimensions, shafts, gear ratios, etc. can be found in the catalogue.
IzhMSC manufactures a range of Ts3H type gearboxes with Novikov gearing, which is designed to provide increased endurance of active tooth surfaces, thus providing higher torque with relatively small gearbox dimensions.
Designation of Ts3H type gearboxes
Assignment.
Cylindrical horizontal gearboxes with Novikov gears of 1Ts3N, Ts3N series,
Ts2H are general purpose actuators designed to increase torque
torque and speed reduction of various machines and mechanisms.
- Gearbox housing made of cast iron castings grade CH20
- Reducer Ts2N-710 : castings body 0126.5.00.0.01 (weight 1620 kg), cover 0126.5.00.0.02 (weight 1140 kg)
- Gearbox Ts2H 630 : castings body 0125.5.00.0.01 a (weight 1100kg) and cover 0125 .5.00.0.02 B (weight 700kg)
- Gear shaft steel 40x Gost 4543-71 NV 260...290
- Gear Wheels: Casting 45L-II Gost 977-75 NV 179...207
Application conditions of Ts3H gearboxes
- constant and variable load, single direction and reversible;
- operation for long periods of time or with intermittent stops, shaft rotation in any direction;
- the input shaft speed must not exceed 1500 rpm;
- ambient temperature from minus 40°C to plus 50°C;
- increased dustiness, non-corrosive environment;
- climatic versions U, T (for placement category 1...4) according to GOST 15150-69.
Example of designation of gearbox Ц3Н-630-125-12М(m12,z40)-У3:
Cylindrical gearbox (C), two-stage gearbox (2), with Novikov gears (H), centre to centre ratio
distance of the slow-speed stage 630 mm, nominal gear ratio 25
assembly variant12, with the end of the low-speed shaft in the form of a toothed coupling half M(m12,z40)
module12, number of teeth 40, climatic design U and placement category 3.
Assembly options:
The gearboxes allow short-term overloads twice the rated ones specified in the table and occurring during motor starting and stopping, provided that the number of output shaft cycles during these overloads does not exceed 5 - 10 4 during the entire service life of the gearbox.
The gearbox has a crankcase non-flowing lubrication system. It is recommended to fill the gearbox housing with the following oil grades: IRp-75, IRp-150 TU 38101451-78; ISp-65, ISp-110 TU 38101293-78, foreign oils: Mobilgear 627, Mobil D.T.E 27, Wiolan IT 150, MO 150 or other oils with kinematic viscosity in the range of 35-150 mm.2 /s at 50 °C.
| Type | 1TS3H-450 | 1TS3H-500 | TS3N- 630 | TS3N- 710 | ||
| Gear ratio | 31,5*; 40; 50; 63; 80; 100; 125; 160;
200 |
|||||
| Rated torque on output shaft, Nm | min | 31 500 | 50 000 | 85 000 | 100 000 | |
| max | 35 500 | 56 000 | 90 000 | 100 000 | ||
| Rated transmitted power, kW | min | 28 | 39 | 67 | 78,5 | |
| max | 157 | 196 | 353,5 | 393 | ||
| Permissible radial cantilever load applied in the middle of the shaft seating part, N | Output. | min | 71 000 | 56 000 | 71 000 | 79 000 |
| max | 71 000 | 60 000 | 75 000 | 79 000 | ||
| Entry. | min | 2 500 | 2 000 | 2 650 | 2 800 | |
| max | 3 550 | 4 500 | 6 000 | 6 400 | ||
| Weight, kg, not more | 1700 | 2120 | 3 900 | 5 020 | ||
| Type | aw1 | aw2 | aw3 | L | l0 | l1 | l2 | l3 | A | A1 | B | B1 | H | H1 | d |
| 1TS3H-450 | 200 | 280 | 450 | 1460 | 260 | 530 | 430 | 650 | 1060 | 515 | 630 | 590 | 870 | 450 | 35 |
| 1TS3H-500 | 225 | 315 | 500 | 1680 | 360 | 615 | 460 | 690 | 1220 | 580 | 700 | 650 | 1055 | 530 | 42 |
| TS3N-630 | 250 | 400 | 630 | 1960 | 585 | 970 | 570 | 760 | 1770 | 540 | 760 | 650 | 1220 | 630 | 52 |
| TS3N-710 | 280 | 450 | 710 | 2250 | 667 | 1060 | 575 | 870 | 2010 | 600 | 780 | 740 | 1400 | 710 | 52 |
